Audio Left/Right Specific

→ if you plan to paint the wire directly, use a piece of cardboard as a protective shield behind the speaker wire when spraying the adhesive.
→ be careful not to cut through the clear wire film unless it specifies in the instructions.

General FlatWire

→ use a plastic smoother (ie. the rounded edge of a wallplate) to press the wire against the surface.
→ crease the wire for the folds or turns before applying spray adhesive.
→ use super-fine cleaning/sandpaper pads to blend the edges of new paint into old paint.
→ measure twice, cut once-really. we do not recommend splicing flatwire.